多用途

TDK EUT Monitoring Lab allows you to acquire data from an EUT via an oscilloscope, a receiver, a spectrum analyzer, a status monitor, or a dynamic signal analyzer. The software can determine the pass/fail status of the EUT by comparing the acquired data against pass/fail thresholds.

可监控参数TDK EUT Monitoring Lab can acquire and display the following types of data:

• Frequency 频率
• Duty Cycle 占空比
• DC Offset 直流偏置电压
• Peak-to-Peak Voltage 峰峰值电压
• Analog Voltage 模拟电平信号
• Digital Signal 数字电平信号

Each of these data values may be compared against thresholds. Whenever a measured value is outside the range of acceptable values, a failure is reported.

Portability Data acquired by TDK EUT Monitoring Lab can easily be transferred to other TDK TestLab applications. This information can be displayed in data tables and graphs along with other test data, giving you access to all test data in one place. This makes it easy to see what the EUT data values were at each test frequency.

软件特色：

• Output signals that can be synchronized with the dwell cycle
• Storage of commonly used instrument configurations
• User-definable data channel names
• Scale factors for transmission link attenuation compensation
• Minimum and maximum pass/fail thresholds

操作系统最低配置：

 

Operating System	Requires Windows XP Professional
Instrument Interface	GPIB interface card

支持的设备及其制造商：

• Dynamic Signal Analyzers: Hewlett-Packard
• Function/Arbitrary Waveform Generators: Hewlett-Packard
• Oscilloscopes: Hewlett-Packard
• Receivers: Hewlett-Packard
• Spectrum Analyzers: Hewlett-Packard
• Base Station Simulator: Rohde & Schwarz, Hewlett-Packard, Wavetek, Racal
• Status Monitors: TDK RF Solutions
• Video Controllers: TDK RF Solutions