High Power Switches-益择网-专业的仪器网上选购商城

详细信息

The ACC series of High Power T/R diode switches span the frequency range of 5MHz to 6GHz and are available with absorptive output on the RX port and reflective port on the TX side. The switches are available in a wide variety of standard frequency ranges. Each switch incorporates a TTL-compatible driver for convenient system integration and operates from +5V to +12v and -50V to -150V DC power supplies (depending on RF power requirements). All switches incorporate DC blocks at the RF ports. Some switches are also available with hermetic seal and high-rel screening for military and aerospace applications.

High Power Switches
Frequency Range (MHz)	Part Number	Insertion Loss (dB max)		VSWR (dB max)		Isolation (dB max)		Switch. Speed (usec max)	RF Power (W CW)	Outline
Frequency Range (MHz)	Part Number	RX Mode	TX Mode	RX Mode	TX Mode	RX Mode	TX Mode	Switch. Speed (usec max)	RF Power (W CW)	Outline
5 – 30	ACSW-5508	1.20	1.0	2.00:1	1.50:1	60	20	10	50	A
5 – 30	ACSW-5509	1.00	1.0	2.00:1	2.00:1	20	20	10	50	A
20 – 550	ACSW-5548	1.20	1.0	1.50:1	1.50:1	60	20	10	100	A
30 – 400	ACSW-5424	1.20	1.0	2.00:1	1.50:1	60	20	10	50	A
225 – 1000	ACSW-5563	0.80	0.6	1.75:1	1.75:1	60	20	10	100	A
320 – 470	ACSW-5510	0.70	0.5	1.50:1	1.50:1	60	20	10	100	A
500 – 3000	ACSW-5564	1.50	0.8	1.70:1	1.70:1	58	20	10	100	A
550 – 2500	ACSW-5549	1.25	0.8	1.50:1	1.50:1	58	20	10	100	A
2500-6000	ACSW-5578	2.40	1.4	1.50:1	1.50:1	20	60	6	80	B
4.4 - 5.0	ACSW-5585	0.7	0.7	1.5:1	1.51:1	35	35	10	20	A


NOTES:
DC Bias:	+12V +/-0.5V @ 100mA max	MECHANICAL SPECIFICATIONS: Case Style: Finish: Chem. Film per MIL-C-4441 Bias & Control Pins: 9 D SUB Male
(Standard)	-100V +/-3V @ 10mA max
TTL 0=TX
TTL 1= RX Mode
J1=Common
J2=RX
J3=TX


Switching speed is defined as 50%TTL to 90% (t-on) and 50%TTL to 10%RF (t-off).

ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -55°C to +85°C Storage Temp: -65°C to +125°C Humidity: MIL-STD-202F, M103, Cond B leak checked Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D	SCREENING: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65°C to +100°C, 10 cycles Optional hermetically-sealed switches are fine and gross per MIL-STD-883, Method 1014. Optional High-Rel screening available upon request. Contact the factory to discuss your screening requirements.
Outline A
Outline B
PART NUMBER ORDERING INFORMATION: Add "-RC" suffix: RoHS-compliant Add "-H" suffix: Hermetic seal (does not apply to RoHS-compliant models)	CUSTOM OPTIONS –CONTACT FACTORY: Gray epoxy paint per MIL-C-22750 Video transient suppression Various Control Logic (ECL, CMOS, RS-232, etc) Phase and amplitude matching Other frequency ranges available Reversed logic High rel screening

分享到：

High Power Switches

详细信息

更多促销产品

更多最新产品